IBM SYSTEM STORAGE TS3500 TAPE LIBRARY MAINTENANCE INFORMATION PDF

This IBM® System Storage™ TS Tape Library Maintenance Information (MI) When you send information to IBM, you grant IBM a non-exclusive right to. This publication provides information about operating the IBM System Storage TS, IBM Tape Library. The IBM Tape Library is a. Note There are two versions of the IBM TS Tape Library Introduction and to the TS tape library with the Advanced Library Management System ( ALMS), IBM TS Maintenance Information (provided with the TS tape library) and servers for tape drives, visit the web at lto.

E06 native cartridge capacity. Model Abstract HA1 The HA1 includes a second library manager and accessor, two service bays and required hardware and is designed for concurrent maintenance.

Ts3500 Tape Library Manual

The base configuration of no tape drive unit and tape cartridge storage cells can be expanded with up to a total of four tape drive units and tape storage cells. It does not contain any tape drives or storage cells for customer data cartridges.

The Model F3A comes with a 2-Gbps Fibre Channel interface for connection to a wide spectrum of open system servers. Attaches to Model A14 frame or. By using inflrmation site you agree to this. For bulk loading of tape cartridges, the library door can be opened. It can also be attached as a free-standing unit to a C12 Silo Compatible Frame.

The WolfCreek Tape Library provides automated shared storage to a wide variety of open and proprietary operating environments at a smaller investment.

A B16 Tape Server with an attached D12 drive unit inforkation also be added for a total of 15 additional frames and up to tape cartridges. The storage capacity and number of drives can be increased by adding either S10 storage units, or D10, D12, and D14 drive units. Each Model D32 frame can have up to 12 logical libraries and 12 control paths. A B16 Virtual Tape Server with an attached D12 drive unit can also be added for a total of 15 additional frames and up to tape cartridges.

Tape Drivers and Tape Libraries – DV Trading A/S

Up to 15 Model D22 Frames may be added to each base frame. The IBM B18 Magstar Virtual Tape Server, a second generation Seascape solution, provides improved performance and capacity to lower the total cost of ownership for tape processing.

StorageTek Libraries The WolfCreek Tape Library is a lower cost-of-entry, robotic library allowing shared data access across mainframe and midrange platforms.

The S10 consists of tape cartridge storage cells and no tape drives. Additional libraries can be easily attached and managed as a single automation system. All this plus remote console support, SNMP management capabilities, multi-host attachment, and modular design make the flexible, easy to use, and the best choice in automated tape library solutions.

This model has the same footprint as the Model L52, which is a smaller footprint than the Model L Attaches to external control unit required. For bulk-loading of tape cartridges, the library door can be opened.

IBM TS tape library publications

Each Model D32 frame supports up to storage slots and up to twelve drives, with incremental reduction of storage slots for each set of four drives installed.

The base configuration of no tape drive unit and tape cartridge storage cells can be expanded with up to a total o f six tape drive units and tape storage cells. Attaches to A60 and tape drives in Model C12 or C E05 native cartridge capacity 3: The ACF can be quickly loaded with a new magazine.

The total quantity of supported tape drives is dependent on the combination of installed B16s and tape subsystems. Data capacity for the Model L22 using data cartridges is TB native and 52 to TB using data compression at 3: With two library managers and dual accessors, and each containing two disk drives for duplication of the library databases, maintenance can now be performed in most situations on the failing library control unit component while the is still available for customer production.

Each virtual volume can now have a maximum capacity of 2.

Ibm system storage ts3500 tape library maintenance information

The subsystem includes tape drives and controllers that can be configured in a broad range of solutions that includes stand-alone frames or racks, or in automated library solutions to meet a diverse set of customer requirements.

Hexagonal-shaped cabinet requires less floor space than other automated systems and minimizes robotic time. Each frame can have up to 12 logical libraries or 12 control paths one per tape drive.

Performance starts at 90 exchanges per hour and upgrades up to exchanges per hour. IBM Tape cartridge Extended. IBM Tape cartridge Economy.

Model upgrades beyond the Model EU6 will not be available. E06 native cartridge capacity 3: The exact ratio depends on which cartridge is used with the tape drive. It delivers almost unlimited automated data storage potential, regardless of environment.