View and Download Caberg Just SpeakS user manual online. Bluetooth Headset & Intercom for Scooters and Motorcycles. Just SpeakS Motorcycle Accessories. Caberg Just Speak Manual Online: Charging The Battery, Pairing. Before Using The CABERG JUST SPEAK System, The Battery Inside The Helmet Must Be. just looking at the screen, keeping an eye on the distance-to-turn CABERG JUST SPEAK EASY .. the manual says it stops “after 30 seconds of silence”.
|Published (Last):||17 August 2016|
|PDF File Size:||5.22 Mb|
|ePub File Size:||1.50 Mb|
|Price:||Free* [*Free Regsitration Required]|
Use only the battery charger provided. Page of 80 Go.
Caberg Just SpeakS User Manual
Do not wear your helmet when charging the battery! Remove the cover of the USB port located on the outside of the communicator and insert the battery charger jack. Never use other must to charge the battery.
With the battery cbaerg charged, the system has about 10 hours standby in continuous communication with another helmet and about 16 hours in phone. Connect the battery charger to the mains V. When fully charged the LED turns green. In phone mode the standby reduces depending on the conversation time, down to a minimum of 10 hours in continuous communication.
jut Don’t have an account? Never wear your helmet when charging the battery. Enter text from picture: Any helmet Master or Slave in Intercom mode can use the mobile phone to which it has been paired.
Helmets Bluetooth Kit – Just Speak – Caberg
When the battery runs low during use, the system switches off: Proceed with the pairing procedure with the two helmets close to one another metres. The red LED comes on, meaning that the battery is being charged. Switch the helmet off when charging the battery. Also See for just speak Safety and instructions for use – hust pages.
Table of Contents Add to my manuals Add.
Charging The Battery; Pairing – Caberg Just Speak User Manual [Page 26]
To decide whether to pair your helmet as the Master or Slave you must understand the difference. These two pairings must be done in quick succession.
Comments to this Manuals Your Name. The green LED comes on.
Decide which helmet you want to be the Master and which the Slave. Got it, continue to print. The main difference between the Master and the Slave is that ONLY the Master helmet at switch-on performs the search for the second helmet pre. A helmet may be paired as a Master or Slave. Don’t show me this message again. By pressing ‘print’ button you will print only current page. The Master helmet must be paired to both the Slave helmet and the mobile phone to communicate with both.
The difference between Master jist Slave is merely that the Master searches for the Slave at switch-on, they are equivalent for all the juzt. Charging The Battery; Pairing. In any case, if a helmet has already been paired as. When the battery has a residual standby of about 1 hour, 3 consecutive beeps will be heard in the helmet every 5 minutes. All pairings stay in the helmet memory even when switched off and are kept when you.
The way the buttons must be pressed differs for Master pairing and Slave pairing. The battery charger works with a voltage of between min. The pairing procedure only needs to be repeated when you change the helmet or mobile phone you want to speak to.
To print the manual completely, please, download it. Each helmet can be paired several times with any.
Never do the pairing procedure when driving. If the device is not used for long periods, the battery needs to be recharged occasionally.